Please enable / Bitte aktiviere JavaScript!
Veuillez desactiver vos / Por favor desactiva el Javascript![ ? ]
NASA Target HF3 SSB Receiver | Radioaficion Ham Radio

NASA Target HF3 SSB Receiver

Share

NASA Target HF3 SSB Receiver AKD HF3 schematic diagram

A favourite of trans-ocean mariners and home users alike, this combination shortwave/SSB/weather fax receiver covers the 30 kHz to 30 MHz range. Complete with easy to use Windows software to enable downloads of Weatherfax pictures, Radiotelex weather forecasts and Navtex.

TARGET HF3/P & HF3/W
The Target HF3 is a masterpiece of R. F. engineering covering the entire spectrum between 30Khz to 30Mhz. For those new to single side band reception the unit comes complete with everything needed to 'get on the air' including a comprehensive instruction manual which includes a list of useful marine frequencies.

Controls on the front of the receiver change reception mode, from a narrow filter for SSB reception to a wide filter which enables high quality audio signals to be heard from broadcast stations around the world. They also control ten memory channels to store your favourite frequencies.

The large, clear liquid crystal display shows the precise frequency tuned to and there is no need for constant 'correcting' with the tuning knob so often associated with SSB signals as the receiver
is fully synthesised.


TARGET HF3/P

The Target HF3/P has a fixed level audio output to connect to third party weatherfax software. The receiver is supplied complete with a basic long wire antenna, 12 volt power cable and instruction book.

NASA TARGET HF3 Receiver was also marketed as the AKD HF3 and as the SRX100 by Lowe Electronics

TARGET HF3/W
The HF3/W is complete with CD software and interface cable for connection to a PC sound card. The software enables reception of weatherfax pictures, Radiotelex weather forecasts and Navtex. Simply install the software, plug in the supplied cable to the receiver output and PC sound card to receive weatherfax pictures and forecasts from around the world. Requires PC Windows XP to 7.

NASA TARGET HF3 Receiver was also marketed as the AKD HF3 and as the SRX100 by Lowe Electronics

Technical Specifications
• Signal level indicator
• Fully synthesised
• Frequency range - 30Khz - 30Mhz
• Modes - USB/AM/LSB
• Single side band - 3.8Khz wide
• 10 memory channels
• AM - 6Khz wide
• Audio output - 2 watts
• Power supply - 12 volts DC
• Power consumption - 300mA
• Dimensions - Width 180mm, Height 58mm, Depth 170mm

NASA TARGET HF3 Receiver was also marketed as the AKD HF3 and as the SRX100 by Lowe Electronics

NASA TARGET HF3 Receiver was also marketed as the AKD HF3 and as the SRX100 by Lowe Electronics

NASA TARGET HF3 Receiver was also marketed as the AKD HF3 and as the SRX100 by Lowe Electronics

AKD HF3 Communications Receiver
Download the Schematic Diagram here

Related Articles