Please enable / Bitte aktiviere JavaScript!
Veuillez desactiver vos / Por favor desactiva el Javascript![ ? ]
IC-V82 2m - 70 cm handheld transceiver | Radioaficion Ham Radio

IC-V82 2m - 70 cm handheld transceiver

Share

Icom IC-V82/U82 2m-70 cm handheld transceiver

Manufactured: Japan, 2004

Icom IC-V82/U82 2m-70 cm handheld transceiverv82/ic-u82_v82_main.jpgHigh Power! Digital Capability!

  • Tough & Rugged
  • Powerful 7W (2m) and 5W (70 cm) of output power
  • Reversible up/down switches and rotary selector
  • 5 Character alphanumeric display
  • 200 Memory channels and 10 memory banks
  • Drop-in desk top charger standard
  • CTCSS and DTCS operation standard with pocket beep
  • Fast scanning speed of 40 channels per second
  • Upgrade to D-STAR with optional UT-118


OPTIONS:

  • PC Programming Software (CS-V82)
  • Digital Voice Unit (UT-114)
  • DTMF Decoder (UT-108)

Optional digital unit, UT-118
The optional UT-118 provides D-STAR format digital voice and slow data communication. The UT-118 includes the following digital features.

Callsign calling
In the digital mode, your callsign and the receiving callsign (or CQ message) are included in each transmission. The callsign squelch allows you to choose an incoming call selected by the callsign.
Also, received callsigns are automatically stored in the memory.

Position exchange with external GPS receiver
When connected to an external GPS receiver*, position information can be exchanged with other stations. When the receiving side is connected to a PC**, position monitoring is possible.
* NMEA0183 output and RS-232C interface are required.
** Position mapping software required (Not supplied by Icom ).
And more digital features

  • 20-character short data message
  • Digital code squelch• EMR communication
  • Digital pocket beep• Stand-by beep

7W powerful output power
A powerful 7W* output power provides superior transmit power. All this power is available with the supplied battery pack. Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time.
* 5W for UHF.

200 memory channels and 10 memory banks
Up to 200 regular memory channels can be stored with a 6-character channel name, tone and duplex settings. The memory channels can be tagged with A-J bank name and allows you easy channel
management. In addition, use Icom’s exclusive DMS (Dynamic Memory Scan) system to scan selected memory banks by simply adding and deleting bank links.

Built-in CTCSS/DTCS
Built-in CTCSS/DTCS tone codes provide quiet stand-by and allow you to access a closed repeater. The pocket beep alerts you when a matched tone frequency is received. The tone scan detects the
tone frequency used in the receiving frequency.

Other features

  • NOAA weather channel receive * (* IC-V82 USA version only)
  • Automatic repeater function (USAversion only)
  • Reversible control knob and up/down buttons assignment
  • Durable construction and simple operation
  • 16 DTMF dial memory
  • PC cloning capability


SPECIFICATIONS

GENERAL
Frequency coverage: (unit: MHz)

  • USATx: 144–148/Rx: 136–174*
  • Europe, Tailand, KoreaTx/Rx: 144–146
  • General (LM), CSA(LM)Tx/Rx: 136–174*

*Guaranteed: 144–148MHz range only.

Type of emission:.........FM
Number of memory channels:.......207 (incl. 6 scan edges and 1 call)
Frequency resolution:................5, 10, 12.5, 15, 20, 25, 30, 50kHz
Operating temperature range:...........–10°C to +60°C; +14˚F to +140˚F
Frequency stability:.......................±2.5ppm (–10°C to +60°C)
Power supply requirement:........7.2 V DC (6–10.3 V DC acceptable; Icom’s battery pack only)
Current drain (at 7.2 V DC: approx.):

  • Transmit 7W (High)2.6A
  • at 4 W (Middle) 2.0 A
  • at 0.5 W (Low)1.0 A
  • Receive standby 80 mA
  • power save 30 mA
  • max. audio 250 mA

Antenna connector:.............BNC (50 Ω)
Dimensions (proj. not included) : 54(W) × 139(H) × 36.7(D) mm 21⁄8(W)×515⁄32(H)×17⁄16(D) in

Weight (approx.):390 g; 13.8oz (with BP-222N and Ant.)200 g; 7.1oz (without battery pack and Ant.) Ext. data connector:3-conductor 2.5 (d) mm (1⁄10″)

TRANSMITTER
Modulation system:................Variable reactance frequency mod.
Output power (at 7.2 V):

  • [Tailand]5.5W/4 W/0.5 W (High/Mid/Low)
  • [Other]7W/4 W/0.5 W (High/Mid/Low)

Max. frequency deviation:..............±5.0kHz [Wide]/±2.5kHz [Narrow]
Spurious emissions:....................Less than –60 dBc
Microphone connector:..................3-conductor 2.5 (d) mm (1⁄10″)/2.2 kΩ

RECEIVER
Receive system: ................Double-conversion superheterodyne
Intermediate frequencies:..............1st: 46.35MHz, 2nd: 450kHz
Sensitivity (at 12 dB SINAD) :....................0.16µV typical
Squelch sensitivity (threshold) :......................0.11µV typical
Selectivity:

  • [Wide]More than 55dB
  • [Narrow]More than 50dB

Spurious and image rejection:................80dB typical
Intermodulation:.................65dB typical
Audio output power:...............More than 0.3 W at 10% distortion with (at 7.2 V DC) an 8 Ω load
Ext. speaker connector:...................3-conductor 3.5 (d) mm (1⁄8″)/8 Ω

OPTIONS

Icom IC-V82/U82 2m-70 cm handheld transceiver

CHARGER

• BC-144N desktop charger + BC-145 ac adapter

For rapid charging of battery packs. An AC adapter is supplied with the charger. Charging time: 1.5 to 2 hrs.

• BC-146 battery charger + BC-147 ac adapter

For regular charging of battery packs. An AC adapter is additionally required. Charging time: 6.5 to 18.5 hrs.

• BC-119N desktop charger + AD-101 charger adapter

For rapid charging of battery packs. An AC adapter is supplied with the charger. Charging time: 1.5 to 2 hrs.

• BC-121N multi-charger + AD-101 charger adapter

(6 pcs.)

For rapid charging of up to 6 battery packs (six AD-101's are required) simultaneously. An AC adapter may be supplied depending on version. Charging time: 1.5 to 2 hrs.

BELT CLIP

• MB-103/MB-86 belt clips

MB-103: Same as that supplied with the transceiver. MB-86: Swivel belt clip

• MB-96F/MB-96N leather belt hanger

MB-96F: Fixed type belt hanger for use with MB-103. MB-96N: Swivel belt hanger. MB-86's base clip is required.

INTERNAL UNIT

• UT-108 dtmf decoder unit

provides pager and code squelch capabilities.

• UT-118 digital unit

provides digital mode operation capabilities.

OTHER OPTIONS

• HM-75A/HM-131L speaker-microphones Combination speaker-microphones that provide convenient operation while hanging the transceiver from your belt. HM-75A has 4 function switches for remote control capabilities.

HM-131L has moisture proof construction.

• HM-128L earphone-microphone

You can clip the microphone with PTT switch to your lapel or breast pocket.

• HS-85 headset

Allows you hands-free operation. Includes VOX, PTT and "one-touch" PTT with time-out timer.

• VS-1L ptt/vox unit+HS-94/HS-95/HS-97 headset VS-1L ptt/vox unit

Required when using these headsets.

HS-94 ear-piece type headset

Earhook headset with flexible boom microphone.

HS-95 neck-arm type headset

Behind-the-head headset with flexible boom microphone.

HS-97 throat microphone

Throat microphone fits around your neck and picks up speech vibration.

• CS-V82 cloning software+OPC-478/U cloning cable Provide quick and easy programming of memory channel, memory name etc.

• OPC-474 cloning cable

For cloning between transceivers.

• SP-13 earphone

Provides clear receive audio in noisy environments.

• FA-B2E whip antenna (for IC-V82) Same as that supplied with IC-V82.

• FA-B70C whip antenna (for IC-U82) Same as that supplied with ic-U82.

Related documents:

IC-V82 /U82 Instruction Manual

Related Articles