Please enable / Bitte aktiviere JavaScript!
Veuillez desactiver vos / Por favor desactiva el Javascript![ ? ]
FT-5200 Mod EXPANDED RF | Radioaficion Ham Radio

FT-5200 Mod EXPANDED RF

Share

YAESU FT-5200

EXPANDED RF

1. Remove power from the radio.

2. Release and remove the front panel.

3. Remove the six screws from the top cover of the radio.

4. Remove the six screws from the bottom of the radio.

5. Remove the top an bottom covers. (CAUTION: the speaker might fall out.)

6. Remove the two screws & front control head mounting plate from the radio.

7. Locate solder pads 1 - 7.

(Standard jumpered pads are 2 and 7 only)

8. Solder jump pads 1,3 and 6

(Pads 1,2,3,6 & 7 are now jumpered)

9. Install front panel mounting plate.

10. Reassemble the radio.

11. Reconnect the power to the radio.

12. Press and hold [D/MR], [F/W] & [REV] keys and turn radio on. (Display will show 000.000 & 300.000 on the display)

13. Set the VHF Receive and Transmit limits:

Enter 118.00 MHz and press [D/MR] (VHF RX Low)

Enter 174.00 MHz and press [D/MR] (VHF RX High)

Enter 140.00 MHz and press [D/MR] (VHF TX Low)

Enter 174.00 MHz and press [D/MR] (VHF TX High)

1 4 Set the UHF Receive and Transmit limits:

Enter 420.00 MHz and press [D/MR] (UHF RX Low)

Enter 475.00 MHz and press [D/MR] (UHF RX High)

Enter 420.00 MHz and press [D/MR] (UHF TX Low)

Enter 475.00 MHz and press [D/MR] (UHF TX High)

15. Press [Function] then [REP] and select 5 MHz Repeater offset for UHF band.

16. Press [Function] then [REP] and select 600 kHz Repeater offset for UHF band.

Options:

Override automatic display dimmer:

Press and hold [MHz] and turn radio on: Use Channel knob to select brightness.

Keyboard VHF Expanded Receive:

Press and hold [DVS] & [MHz] keys and turn radio on.

Related Articles