Please enable / Bitte aktiviere JavaScript!
Veuillez activer / Por favor activa el Javascript![ ? ]
FT-709 MOD EXPANDED RF | Radioaficion Ham Radio

FT-709 MOD EXPANDED RF

Share

YAESU FT-709

EXPANDED RF

1. Remove battery and antenna.

2. Remove battery screws, belt clip screws and side strap screws.

3. Remove black trim on sides of the radio.

4. Remove the two side screws and slide the u-shaped back cover off.

5. Remove the four tiny phillips screws holding the front panel on.

6. The ground jumper on the left side needs to be unsoldered.

7. Fold panel to the right to open the radio

8. Locate Jumpers 1 through 16

9. Jump pins 1,4,7,9,10,11,13 & 16

10. Reassemble the radio.

11. Reset the microprocessor

12. On FT-709 enter 4400 [D], 4650 [D], 4400 [D], 4650 [D]. 5000 [SHIFT]

Note: RX range of 440.0 - 465.0 MHz and TX range of 440.0 - 465.0 MHz

YAESU FT-709  mod EXPANDED RF

Related Articles