KENWOOD TW-4100 REPEATER MOD
1. Remove power and antenna.
2. Remove 4 screws securing the top cover.
3. Remove 10 screws securing the bottom cover.
4. Solder a wire jumper connecting the two RP Pins, (see drawing)
5. Reassemble the radio.
CROSS BAND REPEATER PROCEDURES
The VFO and a Memory channel (except 8 & 9) must be used. Select the proper frequencies, offsets & tone. (VFO simplex operation must use DUP with a 0 offset.)
TURN ON - Enter frequencies in a memory and VFO and press [Shift].
Turn power off. Press and hold [REV] and turn radio on. TURN OFF - Turn Power off.