Please enable / Bitte aktiviere JavaScript!
Veuillez desactiver vos / Por favor desactiva el Javascript![ ? ]
TS-590S PC Control Command Reference | Radioaficion Ham Radio

TS-590S PC Control Command Reference

Share

PC CONTROL COMMAND
REFERENCE FOR THE
TS-590S TRANSCEIVER

CONNECTING TO A PC
You can connect the TS-590S transceiver to a PC COM port using a traditional RS-232C connector, or to a USB port using a USB 2.0 (AB type) cable. Through the transceiver menu, select a baud rate for communications between the PC and the transceiver.

  • Using a RS-232C Straight Cable Directly connect the RS-232C straight cable between the COM port of the PC and the COM terminal of the transceiver.
  • Using a USB Cable When using a USB cable, you must first preinstall a virtual COM port driver on the PC.  Then, connect the USB cable A-connector to the USB port of the PC and the B-connector the USB terminal of the transceiver.

Download FULL GUIDE kenwood corporation © October/01/2010

Related Articles