Please enable / Bitte aktiviere JavaScript!
Veuillez desactiver vos / Por favor desactiva el Javascript![ ? ]
TH-22AT/ TH-42AT QUICK START and FAQ | Radioaficion Ham Radio

TH-22AT/ TH-42AT QUICK START and FAQ

Share

TH-22AT/ TH-42AT QUICK START

1. Press VFO

2. Enter Frequency By

  • a) Using the dial knob
  • b) Or entering the last five digits of frequency

3. If Tone Is Required

  • a) Press T/CT
  • b) Press and hold F for more than one second
  • c) Press T/CT
  • d) Using dial knob select tone frequency
  • e) Press T/CT

4. Memory Entry

  • a) Press and hold F for more than one second
  • b) Select memory number using dial knob
  • c) Press MR to store

5. Memory Recall

  • a) Press MR
  • b) Select memory number using dial knob

TH-22AT/TH-42AT FAQ

Q.                 Does it receive aircraft?

A.                  Yes, the TH-22AT Rx range is 136-174 MHz

Q.                 Is the keypad backlit?

A.                  Yes.  It has a luminescent key pad that glows in the dark

Q.                 My TH-22AT does not have a luminescent keypad

A.               You can add the luminescent keypad by following the instructions on Application Note AAN0018

My kenwood TH-22AT does not have a luminescent keypad

Q.                 Can the TH-22AT be cloned?

A.                  the TH-22AT can be cloned from another TH-22AT using RF.  No wires are required.  See ANN0013

kenwood Can the TH-22AT be cloned?

Q.                 Can the TH-22AT be used in channel display?

A.         The TH-22AT can be setup for channel display allowing only the channel to be changed.  No other information is accessible.

Q.        How do I reset the TH-22AT

A.         A partial reset is to turn off the radio, press and hold UFO while turning the radio on.  For a full resent turn off the radio, press and hold F while turning the radio on

Q.        Is the TH-22AT Mars/Cap capable?

A.         Yes, but the information will only be furnished with a copy of your Mars/Cap license.

Related Articles