Please enable / Bitte aktiviere JavaScript!
Veuillez desactiver vos / Por favor desactiva el Javascript![ ? ]
IC-R3 Operating Guide | Radioaficion Ham Radio

IC-R3 Operating Guide

Share

ICOM IC-R3 Operating Guide

General: The R3 has 2 displays, a color 6 function LCD and a monocolor subLCD. With color LCD you can select 6 screens: 1-Simple 2-ATV (p36) 3-TV (p34) 4-Multi 5-DF (p37) 6-Band Scope (p33) The color LCD is normally OFF and must be turned ON.

Power

Push [POWER] to turn ON

Volume (p11) Push [I]

Sauelch Level (p11) Push and hold [SQL], rotate [DIAL]

Operating Band Selection (p7) Push [<-»] several times as needed to select desired band

VFO or Memory channel selection (p7)

Push |V/M] to toggle

Setting a Frequency (p8) Push |V/M] to select VFO Push [<->] to select band Rotate [DIAL] to change frequency

Selecting a Memory Bank (p16) Push [V/MJ to select MR Push and hold [FUNC], rotate [DIAL] to select

Selecting a Memory Channel (p9) Push [V/MJ to select MR Rotate [DIAL] to select channel

Tuning Step (p8)

Push (< >) to select band

Push and hold [MODE], rotate

[DIAL]

Memory Clear (p16) Push [V/M] to select MR Push and hold [FUNC],

rotate [DIAL] to select bank

Rotate [DIAL] to select channel Push and hold [FUNC] and [V/Ml for 2 sec Push [MODE] to return to VFO

Programming a Memory Channel

Push [<-»] to select the desired band Push [V/M] to select VFO mode Rotate [DIAL] to select desired frequency Push and hold [V/M] for 1 sec (MR blinks) Push and hold [FUNC], rotate DIAL] to select desire bank Rotate |DIAL) to select desired memory channel Push [V/M] for 1 sec to Program

Programming Band Edges(p18-19) To program scan pair "OP" Push [<->] to select the desired band Push [V/M] to select VFO mode

Rotate [DIAL] to select desired start frequency Push and hold [V/M] for 1 sec (MR blinks) Push and hold [FUNC], rotate [DIAL] to select desire band edge xx"A" Push [V/M] for 1 sec to program Rotate [DIAL] to select desired end frequency Push and hold [V/M] for 1 sec (MR blinks) Push and hold [FUNC], rotate [DIAL] to select desire band edge xx"B Push [V/M] for 1 sec to Program

Full Scan (p19) Push [V/M] to select VFO Mode

Push and hold [<->], rotate [DIAL] to select ALL Release, to start scan To stop, push [<-»]

Programmed Scan (p19) Push [V/M] to select VFO mode

Push and hold [<->], rotate [DIAL] to select PROG(#) Release, to start scan To stop, push [<-»]

Band Scan (p19) Push [«-»] to select the desired band Push [V/M] to select VFO mode Push and hold [<->], rotate [DIAL] to select BAND Release [<->], to start scan To stop, push [<-»]

Memory Bank Scan (p20) Push [V/M] to select memory mode Push and hold [FUNC],

rotate [DIAL] to select desired memory bank Push and hold [<->], rotate [DIAL] to scan OFF or ON Release [<->], to start scan To stop, push [<->]

Selecting Scan Edges (p21)

(Programmed Scan)

Select VFO with [V/MJ

Push and hold [<->], rotate [DIAL]

to select scan edge (ALL for full scan, BAND for band scan, PROG(RAM) xx for programmed scan. Release [<-»], to start scan To stop, push [<->]

Tone Scan (p30)

Select freq or memory channel

Select FM mode

Push [FUNC] and [<->] for 2 sec to

start scan Push [*-»] to stop scan

Band Scope (p33)

Push [FUNC] and [I] 2 sec to turn color LCD ON Push [FUNC] and [I] one or more times to select band Set a center freq for band scope Push [FUNC] and [V/M] momentarily to select sweep range

Push [FUNC] and [V/M] for 2 sec to start sweep Push [SQL] to stop sweep

Color LCD Screen Selection (p6) (TV screens only available above 30MHz) Push [FUNC] and [I] for 2 sec to turn ON Push [FUNC] and [J] momentarily one or more times to toggle

TV Operation (p34)

Push [FUNC] and [J] for 2 sec to turn color LCD ON Push [<->[ one or more times to

select the TV channel band Rotate [DIAL] to select chn 2tol3 —or— Push [FUNC] and rotate [DIAL] to select chnl 13 to 69 —Freq selection instead of channel— Push [<->] one or more times to select band above 30MHz Push [FUNC] and [I] one or more times to select TV screen Rotate DIAL to select freq

ATV Operation (p36)

Push [FUNC] and [I] for 2 sec to turn color LCD ON Push \< >\ one or more times to select the desired ATV band Push [FUNC] and [t] one or more times to select ATV screen Rotatate [DIAL] to select freq

Direction Finding (p37) Function only works above 30MHz A external directional antenna

is required Push [FUNC] and [I] for 2 sec to turn color LCD ON Push [<-»] one or more times to select direction finding screen Set frequency

Turn radio antenna for MAX receive level, note direction, signal strength Turn radio ant 180 deg for MAX receive level, note direction, signal strengh Larger of two signals indicated source direction

Set Mode (p38)

Push [FUNC] and [I] 2 sec to turn color LCD ON Push [FUNC] and [(MODE)SET] momentarily to enter SET mode Rotate[DIAL] to select function Push [FUNC] and [<->] to toggle function Push[(MODE)SET] to exit and save

Lock Function (p9) Push [FUNC] and [MODE] for 2 sec to toggle ON/OFF

CPU Reset (p45) Power OFF

Push and hold [FUNC], [V/M], [MODE], and turn power ON

Related Articles