Please enable / Bitte aktiviere JavaScript!
Veuillez desactiver vos / Por favor desactiva el Javascript![ ? ]
IC-756PROII Connection to option/peripheral units | Radioaficion Ham Radio

IC-756PROII Connection to option/peripheral units

Share

Icom IC-756PROII Connection to option/peripheral units

ACC Sockets IC-756PROII ACC Sockets

HF/50MHZ, 1kW linear amplifier

IC-756PROII HF/50MHZ, 1kW linear amplifier

Interface for digital mode

To use a personal computer to operate the digital modes (SSTV, PSK31, BAUDOT RTTY, etc.), it is necessary to install the following interface.

The IC-756PROII is equipped with a digital IF filter that may narrow the receive passband range to 50Hz making it possible to select and receive only one station, even when it is used in PSK31 mode.

If a filter width of 500Hz or less is selected the receive passband filter is activated to avoid interference while the transceiver receives SSB-D (SSB data mode).

Refer to the instruction manual or help file contained in the 3rd party software prior to use.

IC-756PROII Interface for digital mode

This circuit connects the input and output through transformers to prevent RF feedback and to isolate the transceiver from the computer.

External control unit for voice memory keyer

When a properly constructed control circuit is connected to the microphone connector, it is possible to control the transmission of the CW memory keyer (M1 to M4) and DVR (T1 to T4). This also makes it possible to transmit the memory keyer and voice memory while displaying the scope.

 IC-756PROII External control unit for voice memory keyer

Installation of UT-102 optional Voice Synthesizer Unit

The UT-102 is capable of announcing S-meter level, frequency, and operating mode in English (on Japanese). It is possible to select voice speed (fast/slow).

  IC-756PROII Installation of UT-102 optional Voice Synthesizer Unit

CI-V control

Remote jack

A personal computer may be used to control the frequency, operating mode, VFO/memory status, etc. via its serial port, using the Icom Communication Interface V (CI-V).

When the optional CT-17 (CI-V level converter) is connected, it is possible to control up to 4 Icom Transceivers Receivers with a personal computer. A wide variety of 3rd party software applications may be used to provide automated logging and control of your radio.

IC-756PROII CI-V control

Data format of CI-V

IC-756PROII Data format of CI-V

List of commands

Related Articles