Please enable / Bitte aktiviere JavaScript!
Veuillez desactiver vos / Por favor desactiva el Javascript![ ? ]
Emperor TS-5010 Channel Conversion Instructions | Radioaficion Ham Radio

Emperor TS-5010 Channel Conversion Instructions

Share

CB Radio Emperor TS-5010 Channel Conversion Instructions

CB Radio Emperor TS-5010 Channel Conversion Instructions

There are actually two options when converting the Emperor TS-5010. First remove the four screws which are holding the bottom cover in place. Next lift the bottom cover just enough to clear the case and slide it to the right, being careful not to pull the speaker wires loose. You now will be viewing the CPU/PLL board located to the front of the radio. Next refer to the diagram above and locate R539 (TPS) and R540 (TPT) as shown. Once located choose the option below you wish to use to convert the TS-5010 for more channels.

CB Radio Emperor TS-5010 Channel Conversion Instructions

Option #1: Cutting only R540 yields the following channels

  • Band Display " a " CH 1 28.000MHz to CH 50 28.490MHz
  • Band Display " b " CH 1 28.500MHz to CH 50 28.990MHz
  • Band Display " c " CH 1 29.000MHz to CH 50 29.490MHz
  • Band Display " d ' CH 1 29.500MHz to CH 50 29.690MHz
  • Band Display " C " CH 1 26.965MHz to CH 40 27.405MHz


Option #2; Cutting R540 & R539 yields the following channels

  • Band Display " a " CH 1 28.000MHz to CH 50 28.490MHz
  • Band Display " b " CH I 28.500MHz to CH 50 28.990MHz
  • Band Display " c " CH 1 29.000MHz to CH 50 29.490MHz
  • Band Display " d " CH I 29.500MHz to CH 50 29.990MHz
  • Band Display " E " CH 1 26.500MHz to CH 50 26.990MHz
  • Band Display " F " CH 1 27.000MHz to CH 50 27.490MHz
  • Band Display " G " CH 1 27.500MHz to CH 50 27.990MHz
  • Band Display " h " CH I 29.700MHz to CH 50 30.190MHz
  • Band Display " C " CH 1 26.965MHz to CH 40 27.405MHz
Related Articles