Serial Cable for SDR-Cube
Este cable permite conectar el puerto AUX de la SDR-cube al puerto serie de cualquier ordenador para el control, diagnóstico y actualizaciones de firmware
G. Heron / J. Niinikoski
Feb 3, 2011
all I can say is that you need to test the cable with a running SDR-Cube first before you go to program the SDR-Cube! If you don't it's your own fault.. not mine. Make sure you get serial output before pressing in that menu button while powering up on Hyperterminal or your favorite RS-232 program. It's a required check of the cable.
By the way.. all of this can be bought at a local RadioShack and put together in 5-10 minutes for less than $15 or so. Or, bought from a SDR-Cube group member for $15 already done. I recommend the upgrade to 1.01.. it fixed almost all of the minor nitpicks the group has had so far with the software. Points to Juha on that..