Please enable / Bitte aktiviere JavaScript!
Veuillez desactiver vos / Por favor desactiva el Javascript![ ? ]
FT DX 3000 new update Main CPU and TFT | Radioaficion Ham Radio

FT DX 3000 new update Main CPU and TFT

Share

FTDX3000Announcement of new update Main CPU Ver. 0111 and TFT Ver. 0106 flash programming for the FTDX3000 Transceivers.

Before installing new firmware, please verify your current version firmware with the following procedure:

 

How to Confirm the Firmware Version

 

new update Main CPU Ver. 0111 and TFT Ver. 0106 flash programming for the FTDX3000 Transceivers.Press and hold the [POWER] key to turn on the transceiver, while pressing and holding the [SCOPE] key, [GEN] key, [50] key, and [ENT] key on the transceiver's main panel. The versions of each firmware will be displayed on the TFT screen.

*If you already have MAIN V0111 and TFT V0106 software versions, it is not necessary to update the FTDX3000 again.

Down load the FTDX3000 data and [FTDX3000 MAIN (V0111) and TFT (V0106).zip] from the following website:

http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=721B 3F7D596827E0B37BD528EE1A56F1&DivisionID=65&isArchived=0

Please read all instructions before proceeding!

Ver. 0111 MAIN CPU (02/12/13)

• Correct minor bug and implement improvements

• MENU #104 SSB TX BPF now includes 3000WB

• When VFO is in LOCK during split operation, holding the TXW button will permit tuning the VFO frequency.

Ver. 0106 TFT (01/09/13)

• Correct minor bug and implement improvements

We hope this new firmware will increase your enjoyment of your FTDX3000. Thank you for choosing Yaesu radios. If you have any problems or questions, please contact Yaesu, Amateur Tech Support amateurtech-yaesu.com

Best regards,

Mikio Maruya, WA6F
Executive Vice President Engineering & Customer Service
Yaesu USA

Related Articles